Spec Board 0 Request samples
Journal/Specification Guides

Office Wall Murals and Logo Walls: Planning a Branded Workplace

VÉLLANO STUDIO · 8 MIN READ ·

Novarelle abstract mural printed across a wide feature wall
Novarelle abstract mural printed across a wide feature wall

Office wall murals and logo walls in Malaysia: brand artwork, seamless 3.15 m reception walls, fire-rated corridors and printed glass film, zone by zone.

Specifying this now? Get A4 samples on your material, or ask the project desk.

An office wall mural or logo wall is custom-printed artwork, scaled to a measured wall and printed on a wallcovering chosen for that zone of the office. The reception wall carries the brand. Corridors need a fire-rated, hard-wearing base. Meeting rooms need privacy on the glass. Breakout areas need warmth rather than another logo. Plan the office zone by zone and one design language can run from wall to glass without any single material being asked to do everything.

This guide is for interior designers and fit-out teams planning branded workplaces in Malaysia. It covers the artwork a logo wall needs, which VÉLLANO base suits each zone, and the approvals that keep brand colours right. For the general specification process, read How to specify custom printed wallcoverings. For sector picks at a glance, see wallcoverings for corporate offices.

Office wall murals by zone

Most offices have four kinds of wall, and each one asks something different of the wallcovering. Fix the zone first and the material choice narrows quickly.

ZoneWhat the wall must doSuggested basePrint width
Reception and logo wallCarry the brand at full scale, read cleanly from the door, no join through the logoLuxe Artistry NW (ASTM F793 Type II) or another Luxe non-woven3,150 mm, seamless
Corridors and escape routesMeet the fire requirement and take daily trafficFabric Backed FR+ or DuraFlex FR (B-s1,d0, ASTM E84 Class A)1,295 mm (51 in)
Meeting rooms and glazed partitionsPrivacy, safety marking on glass doors, brand on glassFrosted Sticker or One-Way Vision1,194 mm (47 in)
Breakout, pantry and loungesMood and warmth rather than a literal brand messageA Novarelle or Palmera design on a Luxe non-woven or the Eco range3,150 mm or 39 in

The same artwork can be printed on any of these bases, so a brand pattern on the reception wall can reappear in a corridor on a fire-rated material and again as a frosted band on the meeting-room glass.

A large-scale abstract feature wall of the kind used for reception and breakout areas
A large-scale abstract feature wall of the kind used for reception and breakout areas
A large-scale abstract feature wall of the kind used for reception and breakout areas · Luxe Marbre (NOVAR10040)

Logo walls: the artwork you need

A logo printed 3 m wide shows every flaw in the file. Ask the client's brand team for the master files early. The bespoke print requirements are:

  • Format. Vector artwork (AI, PDF or EPS) for logos, type and brand shapes, so edges stay sharp at any size. Photography can come as PSD, TIFF or high-quality JPEG.
  • Resolution. Raster images need 100 dpi or more at final printed size. 72 to 99 dpi is acceptable only for walls seen from a distance, which a reception wall usually is not.
  • Colour. The original colour space with an embedded profile, plus Pantone or NCS references for each brand colour.
  • Bleed. At least 50 mm beyond the wall on every side.
  • Rights. Confirmation that the client owns or has licensed the artwork for reproduction at mural scale. This matters for stock photography and illustrations bought for print or web use.

If the only logo on file is a small JPEG from the website, it can't be enlarged to a wall. We can redraw logos, upscale archive photography and compose patterns from brand assets. Check any raster file with the Artwork Checker, and read Preparing your artwork for large-format wall printing for the detail.

Reception walls: seamless at 3.15 m

The reception wall is where the brand is judged, and a join through a logo or a face is the mistake people notice first. The Luxe non-wovens print up to 3,150 mm wide, so most reception walls are printed in a single seamless drop. Luxe Artistry NW is certified ASTM F793 Type II for commercial traffic, which suits a front-of-house wall people brush past every day.

When a wall is wider than 3.15 m, or the zone calls for a narrower base, plan the joins against the artwork before anything is printed. The Wall Calculator draws the numbered panels and join positions for each material, and the Visualiser shows a design in a room before you commit. Keep logos, type and faces clear of every join. Seamless at 3.15 m explains when wide width is worth specifying.

Luxe Artistry NW texture
Luxe Artistry NW, a canvas-weave non-woven printed up to 3.15 m wide and certified ASTM F793 Type II · Luxe Artistry NW

Corridors and escape routes: fire-rated bases

Office corridors, lift lobbies and escape routes often fall under the project's fire strategy. Where they do, specify a fire-classified base rather than a decorative one. Fabric Backed FR+ is a 15 oz Osnaburg-backed vinyl, and DuraFlex FR is a 15 oz/ly fabric-backed vinyl with a linen-weave emboss and a scrubbable surface. Both are classified B-s1,d0 under EN 13501-1 and ASTM E84 Class A, and both print 51 in (1,295 mm) wide.

The fire classification belongs to the tested product, so name the exact material in the specification and confirm the requirement with the project's fire engineer or consultant. B-s1,d0 vs ASTM Class A explains what each rating means. A corridor is also a good place for a quieter brand pattern or wayfinding graphics rather than a full logo, because it is seen at walking pace and up close.

DuraFlex FR texture
DuraFlex FR, a fire-rated fabric-backed vinyl with a linen-weave emboss for high-traffic corridors · DuraFlex FR

Meeting rooms and glass: printed window film

Glazed partitions are often the largest surface in an open-plan office, and they can carry the brand too. Printed films print up to 47 in (1,194 mm) wide with GREENGUARD Gold, low-VOC UVgel ink.

  • Frosted Sticker gives an etched-glass look for privacy bands and manifestation at eye level. Glass doors need visible marking for safety, and a printed logo or pattern in the frost does both jobs.
  • One-Way Vision Perforated shows a full graphic from outside while people inside still see out, for ground-floor offices and glazing facing the street.
  • Translucent Sticker lets a logo float on clear glass with no visible film edge.

Compare all four in Window films for privacy and branding.

Frosted Sticker texture
Frosted Sticker, an etched-glass film for privacy bands and printed logos on meeting-room glazing · Frosted Sticker

Breakout areas: murals rather than logos

Pantries, lounges and breakout areas are where staff go to step away from work, and a third logo does little there. An abstract or botanical mural changes the mood instead. Novarelle abstracts (marbling, washes and tonal fields) give mood without a literal motif. Palmera brings tropical leaves to the wall at architectural scale. Any design can be scaled, cropped or recoloured to the brand palette, then briefed with Pantone or NCS references. Staff cafés and pantries that also serve visitors can borrow from restaurant and café wall murals, where the same wipe-down and fire questions come up.

The finish changes how a mural reads under office lighting. Smooth matte keeps photographic detail sharp, and textured or linen-weave finishes soften it. See Wallpaper textures and finishes.

A Novarelle abstract mural: mood and colour without a literal brand message
A Novarelle abstract mural: mood and colour without a literal brand message
A Novarelle abstract mural: mood and colour without a literal brand message · Crimson Horizon (NOVAR10024)
A Palmera botanical mural, the kind used to bring warmth to pantries and lounges
A Palmera botanical mural, the kind used to bring warmth to pantries and lounges
A Palmera botanical mural, the kind used to bring warmth to pantries and lounges · Jungle Canopy (PALM10030)

From brief to sign-off: the approval route

Branded walls fail on colour more often than on anything else. A brand red that looks right on screen can print warmer or cooler on a textured base. The bespoke process builds in two checks:

StepWhat happensWho signs off
1. BriefElevations or measurements, artwork or the idea, the space and any fire requirementDesigner
2. PrepareResolution check, colour profiling, scaling and cropping to the elevations, with panel joins planned around key detailsVÉLLANO
3. ApproveA digital proof on your elevation, then a printed strike-off on the specified materialDesigner and client brand team
4. ProducePrinted in our Petaling Jaya print room, panelled, numbered and packed for the installerVÉLLANO

Ask for a strike-off on any wall with brand colours, and sign it off against the Pantone or NCS reference under the office's own lighting. Wallpaper samples and strike-offs covers the difference between an A4 sample and a full-scale strike-off. When the scheme is settled, the Spec Clause tool writes the material, fire classification and certifications into a clause for the finishes schedule, and our guide to writing a wallcovering specification clause explains each line.

Materials in this guide

Frequently asked questions

Can you print our company logo as wallpaper?

Yes. Send the logo as vector artwork (AI, PDF or EPS) with Pantone or NCS references for the brand colours, plus the wall measurements. If only a small or low-resolution file exists, we can redraw the logo. Logo walls up to 3.15 m wide can be printed seamless on the Luxe non-wovens, so no join crosses the logo. Approve colour on a printed strike-off before production.

What resolution does a logo wall need?

Logos and type should be vector files, which stay sharp at any size. Photographs and raster artwork need 100 dpi or more at the final printed size. 72 to 99 dpi is acceptable only for walls seen from a distance. A reception wall is usually seen up close, so aim for 100 dpi or more. The free Artwork Checker tells you the dpi a file gives at your wall size.

Which wallpaper is best for an office reception wall?

For most reception walls a wide-width non-woven such as Luxe Artistry NW is the first choice. It prints up to 3.15 m wide without a join and is certified ASTM F793 Type II for commercial traffic. If the reception sits on an escape route with a fire requirement, use a fire-rated base such as Fabric Backed FR+ or DuraFlex FR instead, and plan the joins around the logo.

Do office corridors need fire-rated wallpaper?

Often, when corridors form part of an escape route in the fire strategy. The requirement comes from the project's fire engineer or consultant, so confirm it for each zone. Fabric Backed FR+ and DuraFlex FR are classified B-s1,d0 (EN 13501-1) and ASTM E84 Class A. Name the exact product in the specification, because the classification belongs to the tested material.

Can the same brand artwork go on walls and glass?

Yes. The same artwork can be printed on wallcovering and on window film, so a pattern on the reception wall can reappear as a frosted band on meeting-room glass. Frosted, one-way vision, clear and opaque films print up to 47 in (1,194 mm) wide. Brand colours on frosted or clear film read differently from paper, so approve them on a strike-off.

How do we make sure brand colours print correctly?

Brief every brand colour with a Pantone or NCS reference and supply files with their embedded colour profile. Then approve a printed strike-off on the specified material, under the office's own lighting, before production. Textured and linen-weave finishes soften colour and detail more than smooth matte, so judge the strike-off on the finish you will actually install.

Can a mural be recoloured to match our brand palette?

Yes. Any design in the VÉLLANO library can be scaled, cropped or recoloured to the wall. Brief the new colours with Pantone or NCS references, and ask for a strike-off, because recoloured designs are colour-critical. Abstract collections such as Novarelle are often used this way for breakout areas and executive floors.

Designs mentioned
Specifying this for a project?Send your walls and brief. We reply with a design, material and sample recommendation within one working day.

Next article

Wallpaper Textures and Finishes: Choosing the Surface for a Printed Mural

Project desk

Have a project on the drawing board?

Send us the walls and the brief. A VÉLLANO specialist will come back with a design and material recommendation, samples and a proposal, usually within one working day.

WhatsApp us